Hydraulic Continues CAN 6020, 6030, 6R

The electronics can control any control unit on the tractor with continuous pressure.

The hydraulics Continues Control CAN continuous oil allows you to apply continuous oil to a control unit from the outside. Prerequisite for this electronics are electronic John Deere rear or inter-axle control units.

Practical examples: 

You want to switch on a pump operated with oil from the outside. You want to fill a slurry tank with a hydraulically driven pump from the fender without having to get on the tractor again.

What we do about it: 

We have developed electronics that allow the continuous oil function to be operated from the outside via two pushbuttons. You press one pushbutton and your control unit dispenses hydraulic oil permanently. A short push of the button is sufficient to deactivate this function. The oil quantity of the control unit can be relearned by the operator of the machine at any time! Furthermore, the set oil quantity is always delivered to the control unit, no matter how large the quantity is set in the cabin in the GS3 monitor. The installation time is also drastically reduced by installing the electronics outside the cabin, directly at the control units with original plugs.

The installation of the electronics takes about 0.5 - 1.0 hours.

Your advantages at a glance:

- No more inconvenient climbing up and down when attaching equipment.

- Lifting and lowering speed can be adjusted separately

- Adjustment takes place via a learning function

- Extremely short installation time

- Highest reliability

- Installation with original connectors

- First-class support directly from the manufacturer