All-wheel drive with activation button (can be switched off)

All-wheel control CAN with activation button for John Deere 5020, 5M, 5R, ...

Compatible with: John Deere 5620, 5720, 5820

With this module, you prevent the tension in the four-wheel drive train when braking the tractor.

Who does not know that? You are shunting with the tractor and releasing the brake releases the tension of the four-wheel brake with a jerk through the tractor and you are no longer where you originally wanted to go. The electronics prevent the tension of the four-wheel when braking by disengaging the four-wheel at a desired speed. By disengaging the all-wheel while still rolling the tension in the vehicle dissolves jerk-free.
By default, the 4WD cutoff speed is set to 6km / h and the cut in speed to 7km / h. This function is only active when the 4WD is off. If you want a different speed to switch on or off, you can indicate this when ordering. This function is only active when the four-wheel drive is switched off and must be activated after the ignition is switched on by means of the supplied pushbutton. An integrated warning light indicates the activation state.

If you want a different startup or shutdown speed you can indicate this when ordering.

Your benefits at a glance:

| Can be switched on and off via pushbutton

| In-button integrated indicator light

| Less tire wear

| The parking lock can be easily inserted

| No distortion of the tractor

| Protection of the grass

| No jerking of the front loader

| First-class support directly from the manufacturer

| Illustrated installation instructions