Hydraulic Remote Control CAN (power lift)

The Hydraulic Remote Control CAN helps you to couple machines or implements to the original John Deere front hydraulic system or to operate a hydraulic top link (other applications are of course possible). Prerequisite for these electronics are electronic John Deere rear or inter-axle control units.

Practical examples: 

You want to couple a machine to the three-point front hydraulics and need to move the lower links to do so. You want to couple a machine to the front or rear hydraulics and need to make the hydraulic top link longer or shorter. You want to fill a slurry tanker with a hydraulically driven pump from the mudguard without having to get on the tractor again.

Our solution for you:

We have developed electronics that allow operation from the outside via two push buttons. Simply plug the electronics into the desired hydraulic valve and the control is ready to go. The Hydraulik Remote Control CAN can learn your individual hydraulic speed.

This is done via a teach-in function that can be started as often as required in order to be able to adjust the oil quantities for specific devices. This taught-in oil quantity is then delivered at the push of a button on the activation button on the respective control unit. Furthermore, the set oil quantity is always delivered to the control unit, regardless of how large the quantity in the booth is set at the quantity limiter.

The installation time is also drastically reduced by installing the electronics outside the cabin, directly at the control units with original plugs. The installation of the electronics takes approx. 0.5 - 1.0 hours.

Your advantages at a glance:

 | No more annoying climbing up and down when hitching up equipment

 | Lifting and lowering speed can be adjusted separately

 | Adjustment takes place via a learning function

 | Extremely short installation time

 | Highest reliability

 | Installation with original connectors

 | First-class support directly from the manufacturer