Hydraulic Float Control CAN CNH

Compatible with:

CASE:

Maxxum 115 ActiveDrive 8,  Maxxum 125  ActiveDrive 8, Maxxum 135 ActiveDrive 8, Maxxum 14 5 ActiveDrive 8

New Holland:

T6.145 Dynamic Command, T6.155 Dynamic Command, T6.165 Dynamic Command, T6.175 Dynamic Command

Steyr:

4115 Profi S-Control 8, 4125 Profi S-Control 8, 4135 Profi S-Control 8, 4145 Profi S-Control 8, 6 14 5 Profi S-Control 8

Mounting kit with M12 rotary switch . Electronic hydraulic valves are required.

The Hydraulic Float Control CAN allows you to control the float position function of the hydraulic valve. No matter whether the manufacturer provides this function or not, or whether you want to use it to couple or decouple equipment.

Electronic John Deere rear axle or intermediate shaft control units are required for this electronic assembly.

Practical examples:  
You want to couple a machine to the three-point front hydraulics and have oil pressure to the valve. You want to uncouple a device, but the oil pressure is still active. Only one float position can be activated on the joystick, but you need two float positions.

What we do:
We have developed an electronic device which allows you to activate the float position from inside or outside by pushing a button. This button can be used to activate and deactivate the float position. This installation kit does not include a button, but rather only an electronic adapter for your own button.

The controller can be placed outside of the cabin. This keeps installation work to a minimum. Installing the electronic assembly takes approx. 0.5 – 1 hour.

Your advantages at a glance:

| The float position can be activated outside of the cabin

| Setting via a learning function

| Extremely short installation time

| Excellent reliability

| Install with original plug connectors

| First-class support direct from the manufacturer