Hydraulic Float Control CAN CNH

Compatible with:

CASE:

Farmall U Pro 95, 105, 115

Luxxum 100, 110, 120

Maxxum MC 110, 110CVX, MC 120, 120CVX, MC 130, 130CVX, MC 115, MC 125, MC 140

Puma 130, 130 CVX, 145, 145 CVX, 160, 160 CVX

New Holland:

T5.95, T5,105, T5.115

T6.120, T6.140, T6.150, T6.155, T6.160, T6.165, T6.175

T7.170, T7.185, T7.200, T7.210

Steyr:

Multi 4095, 4100 , 4105 , 4110 , 4115

4120 Profi, 4110, 4110 CVT, 4120, 4120 CVT, 4130, 4130 CVT, 4140, 6125 Profi, 6140 Profi, 6130 CVT, 6145 CVT, 6160 CVT

Mounting kit with M12 rotary switch . Electronic hydraulic valves are required.

The Hydraulic Float Control CAN allows you to control the float position function of the hydraulic valve. No matter whether the manufacturer provides this function or not, or whether you want to use it to couple or decouple equipment.

Electronic John Deere rear axle or intermediate shaft control units are required for this electronic assembly.

Practical examples:
You want to couple a machine to the three-point front hydraulics and have oil pressure to the valve. You want to uncouple a device, but the oil pressure is still active. Only one float position can be activated on the joystick, but you need two float positions.

What we do:
We have developed an electronic device which allows you to activate the float position from inside or outside by pushing a button. This button can be used to activate and deactivate the float position. This installation kit does not include a button, but rather only an electronic adapter for your own button.

The controller can be placed outside of the cabin. This keeps installation work to a minimum. Installing the electronic assembly takes approx. 0.5 – 1 hour.

Your advantages at a glance:

| The float position can be activated outside of the cabin

| Setting via a learning function

| Extremely short installation time

| Excellent reliability

| Install with original plug connectors

| First-class support direct from the manufacturer