Pictures may differ from the original

Hydraulic Continuous Control CAN CNH

approx. 10-14 working days
€406.37
Incl. 19% VAT , excl. Shipping Cost
In stock
Article number
3104401040
You are not logged in
Hydraulic Continuous Control CAN for CASE, Steyr, New Holland with M30 round switch. Operate hydraulic control unit from outside. Order online now.
Manufacturer:

 

Compatible with:

CASE:

Farmall U Pro 95, 105, 115

Luxxum 100, 110, 120

Maxxum MC 110, 110CVX, MC 120, 120CVX, MC 130, 130CVX, MC 115, MC 125, MC 140

Puma 130, 130 CVX, 145, 145 CVX, 160, 160 CVX

 

New Holland:

T5.95, T5,105, T5.115

T6.120, T6.140, T6.150, T6.155, T6.160, T6.165, T6.175

T7.170, T7.185, T7.200, T7.210

 

Steyr:

Multi 4095, 4100 , 4105 , 4110 , 4115

4120 Profi, 4110, 4110 CVT, 4120, 4120 CVT, 4130, 4130 CVT, 4140, 6125 Profi, 6140 Profi, 6130 CVT, 6145 CVT, 6160 CVT

 

Mounting kit with M30 rotary switch . Electronic hydraulic valves are required.

 

The Hydraulic Continues Control CAN continuous oil allows you to deliver continuous oil to the controller from the outside. Electronic John Deere rear axle or intermediate shaft control units are required for this electronic assembly.

 

Practical examples:  You want to switch on an oil-driven pump from the outside. You want to fill a manure trailer with a hydraulically operated pump from the fender, without having to climb back on the tractor.

 

What we do: We have developed an electronic device which allows you to operate the continuous oil function from the outside, using two buttons. You press a button and your controller continuously delivers hydraulic oil. Pushing the button briefly deactivates this function. The machine operator can re-teach the oil quantity to the controller at any time! In addition, the set oil quantity is always output to the controller, no matter how high the quantity set on the GS3 monitor in the cabin. The installation time is also drastically reduced, since the electronics are installed outside of the cabin, directly on the controllers, with original plugs.  Installing the electronic assembly takes approx. 0.5 – 1 hour.

 

Your advantages at a glance:

| No need to spend time climbing up and down to attach equipment

| Lifting and lowering speeds can be adjusted independently

| Setting via a learning function

| Extremely short installation time

| Excellent reliability

| Install with original plug connectors

| First-class support direct from the manufacturer

 

 

More Information
Product safety information For professional use only!
Manufacturer Ilgenfritz Mechatronics
Write Your Own Review
You're reviewing:Hydraulic Continuous Control CAN CNH
© Ilgenfritz Mechatronics GmbH