Rauch

Filter
Close filters
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 3
No results were found for the filter!
REPARATUR
Rauch | AccoSat Rauch | AccoSat
AccoSat from Rauch defective? We repair and test these electronics on an hourly basis. Fill in the repair form now.
from €110.00 *
* from €110.00 / hour, plus VAT & shipping costs
REPARATUR
Rauch | AGT control unit Rauch | AGT control unit
AGT control unit from Rauch defective? We repair and test these electronics on an hourly basis. Fill in the repair form now.
from €110.00 *
* from €110.00 / hour, plus VAT & shipping costs
REPARATUR
Rauch | Axera C1 Rauch | Axera C1
Rauch Axera C1 defective? We repair & test your and Rauch control units quickly & reliably. Cheaper than buying new. Fill in the online repair form now.
€342.72 *
REPARATUR
Reparatur Axera H EMC Platine Rauch | Axera H EMC board
The Axera H EMC circuit board is defective? We repair your Rauch agricultural machinery electronics quickly. Fill out the repair form now.
€544.00 *
REMAN
Rauch | CCI 100 with HW 1.3 Reman 2056805 Rauch | CCI 100 with HW 1.3 Reman 2056805
Rauch CCI 100 with HW 1.3 (TN: 2056805) Remanufactured. Exchange a defective terminal for a refurbished one. Cheaper than buying a new one. Order now.
€1,524.90 *
plus €952.00 Deposit

REMAN
Rauch | CCI 100 with HW 1.5 Reman 2056805 Rauch | CCI 100 with HW 1.5 Reman 2056805
Rauch CCI 100 with HW 1.5 (TN: 2056805) Remanufactured. Order refurbished electronics online. Save expensive new purchase.
€1,524.90 *
plus €952.00 Deposit

REPARATUR
Reparatur Rauch CCI 50 Rauch | CCI 50
Rauch CCI 50 defective? We repair & test your and Rauch control units quickly & reliably. Cheaper than buying new. Fill out the online repair form now.
From €380.80 *
REPARATUR
Reparatur Rauch Leiterplatte IC24 Rauch | Circuit Board IC24
The Circuit Board IC24 is defective? We repair & test your Rauch agricultural machinery electronics quickly & reliably. Fill out the repair form now.
From €544.00 *
REPARATUR
Rauch | DT2 Rauch | DT2
Rauch DT2 defective? We repair & test your Rauch control units quickly and reliably. Fill out the online repair form now.
€342.72 *
REPARATUR
Rauch | E-Click Rauch | E-Click
Rauch E-Click defective? We repair & test your and Rauch control units quickly & reliably. Cheaper than buying new. Fill in the online repair form now.
From €228.48 *
REPARATUR
Rauch | EMT 4 - 3 Rauch | EMT 4 - 3
Rauch EMT 4 - 3 defective? We repair and check the Rauch electronics for you on an hourly basis. Fill in the repair form now.
from €110.00 *
* from €110.00 / hour, plus VAT & shipping costs
REPARATUR
Rauch | EMT 4-2 Rauch | EMT 4-2
EMT 4-2 from Rauch defective? We repair and test these electronics on an hourly basis. Fill in the repair form now.
from €110.00 *
* from €110.00 / hour, plus VAT & shipping costs
1 From 3

Reliable repair service for Rauch electronics

Rauch is a manufacturer of spreading and fertilising technology used in agriculture. Rauch has been developing modern fertiliser technology and also innovative spreading technology for winter road maintenance very successfully for a long time.

 

The spreader's control unit broke down during the fertiliser season?

No problem: Ilgenfritz Mechatronics repairs the fertiliser spreader operating units of your Rauch technology quickly and reliably. No matter whether it is a large area spreader, disc spreader, box spreader or pneumatic spreader. Our electronics specialists know the equipment inside out. We repair operating terminals of the models Axis, Axent, Aero and many more.

The fertiliser spreader models are operated with complex technology. The Quantron A terminal, for example, helps you to set the correct dosage with its intelligent software. We repair not only the newer devices of the Quantron series, but also all older models that are no longer available new.

We can also repair universal terminals such as the CCI 50. ISOBUS terminals are very versatile and can be used regardless of manufacturer.

 

You have a machine breakdown during winter service because the salt spreader is on strike?

If the control unit of your salt spreader no longer works, you can simply send it to us by parcel service. We will repair your control units quickly and reliably. Do you need the part back within 2 days? We also offer an express service. Then your spreader operating unit will be processed on the same day it arrives.

 

Find the defective Rauch operating terminal in our online shop and fill out the repair form.

 

You haven't found the defective control unit from Rauch in the Online Shop? Send us a repair request and let us advise you personally.

Viewed

© Ilgenfritz Mechatronics GmbH

Imprint

Terms and Conditions

Privacy and Privacy Social Media

Cancellation policy