All-wheel control CAN with activation button

Who hasn't?
You are manoeuvring the tractor and when you release the brake, the tension on the four-wheel brake is released with a jolt from the tractor and you are no longer standing where you originally wanted to go.

The electronics prevent the tension of the four-wheel brake when braking by disengaging the four-wheel under a desired speed. By disengaging the all-wheel while the vehicle is still rolling, the tension in the vehicle is released without jerking.

As standard, the all-wheel cut-off speed is programmed to 6 km/h and the cut-in speed to 7 km/h.

This function is only active when the all-wheel drive is switched off. If you would like a different switch-on or switch-off speed, you are welcome to specify this when ordering. This function is only active when the four-wheel drive is switched off and must be activated after the ignition is switched on by means of the push button supplied. An integrated indicator light shows the activation status.

If you wish a different switch-on or switch-off speed, you are welcome to specify this when ordering.  

Your advantages at a glance:
| Can be switched on and off by push button
| Indicator light integrated in button
| Less tyre wear
| The parking lock can be inserted effortlessly
| No tugging of the tractor
| Protection of the grass hub
| No jerking of the front loader
| First-class support directly from the manufacturer
| Illustrated installation instructions