Repair press/bale wrapper control units

The control unit of the baler should function properly, especially during the season. Therefore, have the electronics checked for faults before the harvesting season or even after use. We are your competent partner for control units from Claas, Deutz, Fendt, John Deere, Kuhn, Krone, Kverneland and many other manufacturers.

And it works that simple:
1. find your electronic part to be repaired
2. fill out the repair form and enclose it with your package
3. pack the part to be repaired securely and send it to 
Ilgenfritz Mechatronics GmbH, Marktplatz 4, 97234 Fuchsstadt, Germany

Use the online repair form for fast order processing. If you cannot find your defective electronic part, please send us a repair request.

The control unit of the baler should function properly, especially during the season. Therefore, have the electronics checked for faults before the harvesting season or even after use. We are... read more »
Close window
Repair press/bale wrapper control units

The control unit of the baler should function properly, especially during the season. Therefore, have the electronics checked for faults before the harvesting season or even after use. We are your competent partner for control units from Claas, Deutz, Fendt, John Deere, Kuhn, Krone, Kverneland and many other manufacturers.

And it works that simple:
1. find your electronic part to be repaired
2. fill out the repair form and enclose it with your package
3. pack the part to be repaired securely and send it to 
Ilgenfritz Mechatronics GmbH, Marktplatz 4, 97234 Fuchsstadt, Germany

Use the online repair form for fast order processing. If you cannot find your defective electronic part, please send us a repair request.

Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
9 From 10
No results were found for the filter!
REPARATUR
Taarup | Bale wrapper operator terminal Taarup | Bale wrapper operator terminal
Taarup bale wrapper defective? We repair and check the electronics of Taarup for you on an hourly basis. Fill in the repair form now.
from €110.00 *
* from €110.00 / hour, plus VAT & shipping costs
REPARATUR
Tanco | Auto Bale Wrap Controller Tanco | Auto Bale Wrap Controller
Tanco Auto Bale Wrap Controller defective? We repair & test your Tanco controllers quickly and reliably. Fill out the online repair form now.
€342.72 *
REPARATUR
Tanco | Control unit AutoWrap Tanco | Control unit AutoWrap
Tanco control unit AutoWrap defective? We repair & test your Tanco control units quickly and reliably. Fill in the online repair form now.
From €170.00 *
REPARATUR
Tanco | RDS operation S200 Tanco | RDS operation S200
Tanco RDS operation S200 defective? We repair & test your Tanco controllers quickly and reliably. Fill out our online repair form now.
€342.72 *
REPARATUR
Tanco | Tanco 1400 Tanco | Tanco 1400
Tanco 1400 defective? We repair & test your Tanco control units quickly & reliably. Cheaper than buying new. Fill out the online repair form now.
From €304.64 *
REPARATUR
Telemecanique | XAC-B 04 Press control panel Telemecanique | XAC-B 04 Press control panel
Press control unit XAC-B 04 defective? We repair and test the electronics of Telemecanique on an hourly basis. Fill out the repair form now.
from €110.00 *
* from €110.00 / hour, plus VAT & shipping costs
REPARATUR
Tellefsdal | Autowrap 4000 IR Transmitter Tellefsdal | Autowrap 4000 IR Transmitter
Tellefsdal Autowrap 4000 IR transmitter defective? We repair & check Tellefsdal electronics for you on an hourly basis. Request now.
from €110.00 *
* from €110.00 / hour, plus VAT & shipping costs
REPARATUR
Reparatur Tellefsdal Bedienteil Ballenwickler Tellefsdal | Bale wrapper control unit
Tellefsdal bale wrapper control panel defective? We repair & check Tellefsdal electronics for you on an hourly basis. Request now.
from €110.00 *
* from €110.00 / hour, plus VAT & shipping costs
REPARATUR
Tellefsdal | Control Panel Tellefsdal | Control Panel
Tellefsdal control panel defective? We repair & check the electronics of Tellefsdal for you on an hourly basis. Fill in the repair form now.
from €110.00 *
* from €110.00 / hour, plus VAT & shipping costs
REPARATUR
Trimble | EZ-Guide 250 Trimble | EZ-Guide 250
Trimble EZ-Guide 250 defective? We repair & test your Trimble displays quickly & reliably. Fill out the online repair form now.
from €110.00 *
* from €110.00 / hour, plus VAT & shipping costs
REPARATUR
Trimble | FmX Trimble | FmX
Trimble FmX defective? We repair and replace touchscreens of Trimble terminals quickly & reliably. Fill out the online repair form now.
From €425.00 *
REPARATUR
Vicon | Operation round baler Vicon | Operation round baler
Vicon round baler operation defective? We repair and check these electronics on an hourly basis. Fill in the repair form now.
from €110.00 *
* from €110.00 / hour, plus VAT & shipping costs
9 From 10

Repair service for operating terminals of balers and bale wrappers

The control unit of your baler or bale wrapper is broken?

We repair your defective operating units. The display has streaks or no longer works properly? The keys can no longer be pressed?

The operating units of balers or wrappers can also break down due to moisture penetration, mechanical impact, cable fire or old age.

For every round baler, square baler or wrapper there are operating parts without which control is no longer possible. If a part breaks down, you as a farmer have downtime and costs.

Often, older operating terminals for the baler are no longer available for purchase or a new part is very expensive. These are precisely the reasons why you should opt for a professional repair. We also give you a one-year guarantee on the repaired function of the part.

 

We repair your operating parts for balers and bale wrappers.

Our repairs are carried out by highly qualified personnel on the most modern equipment. We replace membrane keypads, carry out display repairs and also replace entire panes on the control panels.

For more than 20 years, we have been successfully repairing and testing operating terminals of round balers from the agricultural technology sector.

You simply send us your defective control units with the completed repair form. We will inform you about the condition and repair of your electronic parts and after a short time, if the repair is successful, you will receive the units back in working order.

We repair control units of the brands Claas, Deutz, Fendt, John Deere, Krone, Kverneland, Kuhn, McHale, Müller, New Holland, Pöttinger and many more.

 

What does the repair of a baler control cost?

The prices depend on the type of repair. You can find out how much a repair costs simply by looking at the respective repair articles or, if necessary, by selecting what is defective on the product. Depending on the type of repair, e.g. display repair on the Balercontroler or disc replacement on the Comfort Terminal, the prices vary accordingly according to the amount of material required.

 

How long does a repair take?

As standard, we need 3 - 5 days to repair a control unit. If you need the control unit of your harvesting equipment very quickly, we also offer an express service. In this case, we start working on the part on the day it arrives.

 

You have not found your defective part in the online shop?

No problem, just send us a repair request by e-mail. We are happy to take on challenges and check whether we can also repair your electronics.

 

Viewed

© Ilgenfritz Mechatronics GmbH

Imprint

Terms and Conditions

Privacy and Privacy Social Media

Cancellation policy