The fault diagnosis tool helps to repair defective electronics

In order to successfully complete an electronics repair, not only is the repair and replacement of defective parts necessary, but also a fault test. The test procedure must check whether the repaired electronics also works correctly again in real conditions, i.e. the tractor or agricultural machine.

This is exactly our goal:

Repair and test defective control units and operating units so that they are fit again for daily use in the tractor.

 

How exactly does our error diagnosis tool work?

Our fault diagnosis tester consists of hardware and software. The hardware records measurement data and takes over the control of analogue, digital and also BUS signals. These data are exchanged with each other and provide information about signals and states. 

To simplify matters, here is an example:
A defective drive lever from Fendt is delivered to us with the following error message: The drive lever sporadically no longer functions when actuated.

Our electronics specialists connect the driving lever to our test system. Now every function of the lever is tested on performance. The joystick is moved, buttons pressed and dials turned. On the computer screen, the electronics specialists can see whether the function is working properly or whether there is a defect. If the joystick shows a defect, our error diagnosis tool sends a hint.

Now our specialists know that the fault is found here. Due to our long experience in the field of agricultural machinery electronics, we already know many parts very well and can repair precisely and efficiently.

Once the defective components have been replaced or solder points have been re-soldered and the electronic system has been repaired, it is screwed back together and tested again. In this test round, our specialists use the fault diagnosis system to check whether the function is now given and the repair was successful.

Reparatur und Instandsetzung von Agrarelektronik

Development of PC-based test systems by Ilgenfritz

The basic requirement for professionally repairing defective electronics from tractors, combine harvesters, seed drills, etc. is to know and understand the electronics.
This is exactly what the technicians and engineers at Ilgenfritz deal with on a daily basis.

The knowledge of the already known control units is constantly expanding and new electronics have to be re-engineered. All this goes into our test system and provides our customers with an almost perfect result.

 

Where is the repair service located?

The Ilgenfritz electronics repair service is located in Fuchsstadt (Reichenberg) near Würzburg. However, we not only repair defective tractor electronics regionally, but also receive deliveries from all over Germany, Europe and even the whole world. Unlike conventional repair workshops, you do not bring us the entire agricultural machine, tractor or combine harvester, but only send us the defective part.

Have the control unit, terminal or even the display instrument dismounted and sent to:

Reparatur und Instandsetzung von Agrarelektronik

Ilgenfritz Mechatronics GmbH
Marktplatz 4
97234 Fuchsstadt
Germany

Please also enclose the filled out repair form with the package. You can easily fill this out online.

 

How does a repair work?

As soon as we receive the electronic device, you will receive a status notification by e-mail. If the repair starts, we will also inform you about the current status. If we have any queries, we will contact you. After the repair, we will inform you about the tracking number and the expected delivery date.

You still have questions about the repair of a specific part from your agricultural machine?

Contact our customer support via contact form, e-mail or also by phone: +49 (0) 93 33 90 41 300. We will be happy to answer your questions and advise you in the best possible way about our repair services.

Please enter these characters in the following text field.

The fields marked with * are required.

Related products
Smart-Repair Smart-Repair
REPARATUR
Smart-Repair Smart-Repair
REPARATUR
Smart-Repair Smart-Repair
REPARATUR
Smart-Repair Smart-Repair
REPARATUR
Smart-Repair Smart-Repair
REPARATUR
Fendt | Control panel Fendt | Control panel
From €476.00 *
Smart-Repair Smart-Repair
REPARATUR
Smart-Repair Smart-Repair
REPARATUR
Bosch | EHR 4 Bosch | EHR 4
€501.50 *

© Ilgenfritz Mechatronics GmbH