Hydraulik Remote Control CAN Claas with 4 buttons

Product information "Hydraulics Remote Control CAN Claas with 4 buttons".

Compatible with: Claas Arion 410 (CIS), 420 (CIS), 430 (CIS), 440, 450, 460, 530, 540, 550, 620, 630, 640, 650 tractors with Sauer-Danfoss CAN-BUS valves.

Like the hydraulic remote control, the hydraulic remote control CAN helps you when coupling machines or implements to the front hydraulics (Sauter, Laforge, Zuidberg, Stemplinger) or when operating a hydraulic top link (other applications are of course possible). Prerequisite for these electronics are electronic Bosch CAN control valves.

The operation can be done on both sides with this parts set!

Practical examples: You want to couple a machine to the three-point front hydraulics and need to move the lower links to do so. You want to couple a machine to the front or rear hydraulics and have to make the hydraulic top link longer or shorter for this purpose. You want to fill a slurry tank with a hydraulically driven pump from the fender without having to get back on the tractor.

What we do about it: We have developed electronics that allow operation from the outside via two push buttons, similar to what is possible with hydraulic remote control. However, this hydraulic remote CAN electronics is technically very different from the previous solution. The biggest advantage is that the electronics are informed of the oil quantity to be dispensed by the control unit via a learning function and not via potentiometers as was previously the case. The oil quantity can thus be relearned by the operator of the machine at any time! Furthermore, the set oil quantity is always delivered to the control unit, regardless of how large the quantity is set in the cabin. The installation time is also drastically reduced if you install the electronics outside the cabin, directly at the control units with original plugs. The installation of the electronics takes about 1.0 - 1.5 hours.

Your advantages at a glance:

• 4 operating buttons for operation from both sides
• No more annoying climbing up and down when attaching equipment
• Lifting and lowering speed can be adjusted separately
• Adjustment takes place via a learning function
• Extremely short installation time
• Highest reliability
• Installation with original plugs
• First-class support directly from the manufacturer